Commax DR-2GS, User Manual, Page: 6 / 9

4 . Connection wring diagram and Setting
drawing
4 5
3
-3. SECURITY OFFICE DEVICE (CDS-2AG) Manual
ྙ
You can call household unit when you press SP.PHONE (Speaker phone) button after you call from
DR-2GS to guard station.
- At this time, led of
‘
SELECT 4
’
switch is turned on and DR-2GS that is called is stored.
- However, if another number is already stored in
‘
SELECT 4
’
, DR-2GS that is called newly is stored
ྚ
Press building/household unit number and call.
ྛ
When you finish the calling a household unit please, take down the receiver (HOOK ON)
then, pick up the receiver (HOOK OFF) and press 'SELECT 4'. Finally, you will see the number
that is called to DR-2GS.
ྜ
When you press paging button (#) calling and door opening will be activated.
3
-4. ID Setting
- Up to 3 units can be added. The setting can be made in a guard station.
- If ID is duplicated, it may not operate properly.
ྙ
Call the guard station.
ྚ
After you pick up the receiver, and then press the remote control button.
ྛ
0101 -> Building (*) button -> 99XX (Input ID in XX sections) -> Paging (#) button
ྜ
If there is other extension, proceed in the same way.