3
8
①
Press Program Button "P".
②
Press Management password.
③
Press Call Button "E".
④
Press "15" (Program Number).
⑤
Press Call Button "E".
⑥
From a household unit, Call security. The factory default household unit number appears on
the OLED display of the lobby phone. Please Press the actual unit number.
⑦
Press the actual unit number and press Call Button "E".
⑧
Press "0" (0 is Master lobby phone number. If multiple lobby phones are installed, please
Press the corresponding lobby phone number) and press Call Button "E".
⑨
On the OLED display, the unit number input mode appears.
⑩
By repeating 6, 7, 8, 9 procedures, other unit numbers can be registered.
⑪
As unit number registration is done press Cancel Button "X" to exit.
<References>
•
Master-videophone's "Multi Sub Number" is number 0 (zero).
•
Sub-videophone's "Multi Sub Number" is given between 1 and 4.
•
Up to 4 videophones can be installed in a single household unit and
the "Multi Sub Numbers" shall not be overlapped.
•
"Multi Sub Numbers" for sub-videophones shall be registered in
numerical order.
•
At least one Master-videophone with "Multi Sub Number 0" must be
installed and if only one videophone is installed, it is considered as
Master-videophone (set as Multi Sub Number 0).
•
In case that ADT-481 is installed, it does not register as Master unit.
•
If sub-videophone is 485 system, its Master-videophone's Multi Sub
Number is 1 (one) and those of sub-videophones are between 2 and 4.
Summary of Contents for CMP-CTS
