45
5.7.1. Wallpad setting
You can set the SIP server, call number of guard station and passwords for wallpad.
* Wallpad type setting
- You can set wallpad using Maset or Slave
- If wallpad sets Slave, input IP of Master wallpad and select Slave number (501 ~
510)
※
If you are a member of COMMAX, you need to initialize the member information
before setting it as Slave.
※
After the setting of the month pad type is completed, it is automatically rebooted.
Note) a. When operating master and slave in the cab, make sure all the IP of the wall
pad is set to fixed IP
(When set to DHCP, synchronization between master and slave may not be
possible.)
B. When the slave malfunctions or power is off, communication delay between
master and slave occurs and all devices may slow down
There is.
C. If the IP address of the slave is changed, be sure to reboot the master wall
pad to synchronize the master / slave.
D. If changing the slave wall pad to Master, be sure to reboot the existing
Master
Wall Pad to synchronize Master / Slave
It will be canceled.
