8
9
Notes for installing
- Please keep the product away from magnetism, severe moisture,
irect sun rays and nearby heater, which may influence on the product
- Suitable height for main unit is 1450 ~ 1500mm from the bottom to the screen.
- Please arrange the handset after installation is completed
- Please refer to [7. Camera Setup] regarding the Installation of Camera units
- Please keep the product away from direct sun rays or strong reflected light
You may not get clear screen quality.
Installation method of camera (at DRC-4CH)
Installation method of monitor
1. Visitor call & Monitoring
When you push the [CALL] button on Camera unit, you can hear the chime sound
from the Master(CDV-71BQ), Sub-Monitor(CDV-71BQS) and the visitors’ picture
as well as Camera Number will be shown on a screen with quad display .
(Duration of on-screen : 30 sec)
You can pick up the handset if you want to talk.
the screen is off while you’ re talking, you can push [MONITOR] button in order to
speak again. (Duration of talking: 60 sec)
After checking visitors, you can push [OPEN] button to open the door,
while you press the button, the relay connection of door camera will be sustained.
Press the [MONITOR] button to see condition of the door in standby , and then press
the [RIGHT ] or LEFT ( ) button to see the screen of next camera.
In this case, if the camera is not connected in Setup mode, that channel is passed.
While talking with door camera or monitoring camera, the door will be open
if you press [OPEN] button.
While talking or monitoring over the camera, you may store 1 cut with quad disply
by pressing the [REC/DEL.] button
