8
①
It is possible to communicate with interphone for 60 seconds, You can also extend
more 60 seconds by pressing call button on the video phone or interphone. When
the time is over(60 seconds), it turns to stand-by mode automatically.
②
You can talk with CAMERA2 by calling CAMERA2 during communicating with
CAMERA1, the screen will be sequentially shown from CMAERA1 to CAMERA2
when user press (monitoring button).
③
When the visitor calls from the entrance(door camera) during communicating
between video phone and interphone, The LEDs of (Monitoring button) and
(talk button) blink, 3-way communication is possible by pressing (Monitoring
button) or (talk button).
Press (talk button) to finish talking.
(5) Save image
①
To save camera images, press (save image button) more than 1second during
calling camera or monitoring mode.
②
You can save still image is shown on the screen when you press button.
③
While it is saving the video clip, save image buttons will not work. The button will
work after image saving is complete.
④
This function operates regardless of setting for recording method(Auto/manual)
⑤
You can use same function by pressing (monitor button) for long when you call
camera or monitoring.
⑥
Images are stored in SD CARD only. If you don't put in SD CARD or use defected
SD CARD, saving images is not available.
(6) Monitoring
(The following scenario is the example that 2cameras and 2 CCTV are installed. If they
are not installed as like the example, the monitoring function of relevant camera doesn't
work.
- Monitoring sequence (The monitoring mode will be sequentially operated when user
presses button as follows.)
(a) CAM1 (Full) + CCTV1 (PIP)
- No CCTV1 signal, transferred (b)
(b) CAM1 (Full)
(c) CCTV1 (Full)
- No CCTV1 signal, transferred (d)
(d) CAM2 (Full) + CCTV2 (PIP)
