background image

1. Receiving a calling from visitor.

When the call button is pressed by a visitor on the door camera, the melody shall be

rung and visitors' image is shown on the screen

(If you do not press the Talk Button, the display will be shown up for 30 seconds and

turned off automatically).

By pressing the Talk Button, you are able to talk with visitor. By pressing the Door

Release Button, you can open the door for visitor(Door release function can be done

only when the monitor is showing the visitor, on the camera which has door release

function.)

When monitor and door camera are on talking, the 3-party talking is possible by

picking up receiver of the interphone. (Camera-Monitor-Interphone talking at same

time.)

By pressing Talk Button again you can end the talking and monitor comes back to

stand-by mode.

2. Talk with Interphone.

(1) Calling from the Interphone.  

You will hear calling sound when interphone call the monitor.

Press Talk Button to talk with the interphone.

When monitor and interphone are on talking, the 3-party talking is possible by calling

from the door camera. (Camera-Monitor-Interphone talking at same time.)

(2) Calling the interphone from the monitor.  

Press Talk Button and Interphone Button in order to call the interphone from the

monitor. (Interphone button should be pressed & held until the interphone answers.)  

Then talking is available by picking up the handset of interphone.

3. Monitoring : To see the visitor at the door.

5

(On stand-by mode) Operation  

- By pressing the Monitor button repeatedly, the monitor will work as following in order.  

Camera 1 

Camera 2 

OFF 

Camera 1

...... 

(On talking mode) Operation 

- By pressing the Monitor button repeatedly, the monitor will work as following in order.  

Camera 1 

Camera 2 

Camera 1 

Camera 2 

...... 

Caution :

When you use only 1  camera, please connect the short pin(jumper), which is included
in product packing, to the terminal 

Camera 2 Select” on the back side of the product.

(When the short pin is connected, the camera 2 does not work.) 

6. Operation

Summary of Contents for CDV-70P









Reviews: