7
the screen and , 3-way communication begins..
※
Communication ends when the handsets are hung up.
(4) Save image
①
To save camera images, press (save image button) more than 1second during
calling camera or monitoring mode.
②
You can save still image shown on the screen when you press the button.
③
While it is saving the video clip, save image buttons will not work. The button will
work after image saving is complete.
④
This function operates regardless of setting for recording method(Auto/manual)
⑤
You can use same function by pressing for long when you call camera or
monitoring.
⑥
Images are stored in SD CARD only. If you don't put in SD CARD or use defected
SD CARD, saving images is not available.
(5) Monitoring
(The following scenario is the example that 2 cameras and 2 CCTV are installed. If
they are not installed as like the example, the monitoring function of relevant camera
doesn't work.)
- Monitoring sequence (The monitoring mode will be sequentially operated when
user presses button as follows)
(Standby mode)
- It will be sequentially operated when user presses monitoring button as
follows.(Without CCTV connection)
- CAMERA1
CAMERA 2
OFF
CAMERA 1 ............
- It will be sequentially operated when user presses monitoring button as follows.
(With CCTV connection)
- CAMERA 1
CCTV 1
CAMERA 2
CCTV2
OFF
CAMERA 1 ............
(During Communication)
No CCTV switch. - CCTV does not have communication function.
- It will be sequentially operated when user presses monitoring button as follows.
(CAMERA1
CAMERA 2
CAMERA 1
CAMERA ............ )
