Commax CDS-2AG, User Manual

Page: 13 / 22

12
2) Enter the building number that you wish to check + “*”(Building button)
and enter the lowest household unit number.
3) Press “Extension” button.
4) Press “Confirm” button
5) Enter the highest household unit number (*do not enter the building
number again).
6) Press “#”(Paging button). The system starts checking the line status
(If error occurs, it will be displayed on the LCD and the status checking
process stops)
7) Press “#”(Paging button) to continue checking the status.
13. To set the time
※ ※
When you set up the time, please do not pick up a handset.
1) Press “Time” button.
2) Please enter YY(year) – MM(month) – DD(date) – HH(hour) –
MM(minute) – W(day) in this order (*24 hours standard).
※
Day : 1(for Sunday) ~ 7(for Saturday)
※
(Ex : 99 (year)10 (month) 11 (date) 09 (hour) 30(minute) Tuesday
→
Please enter as 99 10 11 09 30 3
3) Press “Input”.
14. Registration (Please review thoroughly)
To register each household unit number
※
the unit number registration only functional as the household unit calls
the security station and during the call.
Please do not hang up while registration is being processed.
(Registration does not work if the call was initiated by the security station)
1) Pick up a handset of the household unit phone and call a security station.
2) Please pick up the handset (security station) & press “Remote” button.
3) Enter the building number and press “*”(Building button).
4) Enter the household unit number and press “Extension” button.
※ ※
If “#”(Paging button) was pressed instead of “Extension” button, it will be
recognized as the master unit.
5) Enter a sub unit number (from 0 to 9) and press “#”(Paging button).