1. Call from door camera
①
Visitor’s image will be shown on the monitor with emitting chime sound
when a visitor press the call button on the door camera at the entrance.
②
Press the talk button by watching visitor, and talk with a visitor. Press the
Open button and door will be open.
(Door release will be operating during monitor is on)
③
If lobby phone or guard station call to monitor during it is talking to individual
door camera, electric chime will make sound.
Then, press talk button and talking with individual camera will finished and
start to talk to lobby phone or guard station.
④
Maximum talk time is 60 seconds and if more talk is needed, press talk
button again.
⑤
Then press the talk button after the end of talking with a visitor, conversation
mode will be turned into Standby mode.
2. Call from lobby phone
①
Visitor’s image will be shown on the monitor with emitting chime sound
when the visitor presses the call button on the lobby phone.
②
Press the talk button by watching visitor, and talk with a visitor.(Screen is off
after 60 sec automatically from the beginning of conversation)
③
If door camera calls to monitor during it is talking to lobby phone, electric
chime will make sound.
Then, press Door button and talking with lobby phone will finished and start
to talk to door camera.
④
To release the door lock during conversation, press the door release button.
3. Talk with guard station
(1) Call from guard station
①
Melody announcing the call will be emitted when monitors have a call from
the guard station.
②
Press the talk button and conversation will begin.
③
If door camera calls to monitor during conversation with guard station,
visitor’s image will be shown on the monitor with lower chime. Then, press
the button to end the talk with guard station and talk with visitor.
4. Operating
5
