APR/30/2003
RST771A OP
15
on the LCD screen to show the LCD remote transmitter is on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen transmitter
If you want mute the “bi” sound mute always while press button. Press the
button first, within 3
seconds press and hold the
(Bi)
button for 2 seconds to disable the “bi” sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing
the button of the LCD screen transmitter.
9. Set Up Fixed Count Down Timer:
1. Press the
button first, within 3 seconds press and hold the
(
)
button for 2 seconds, the
LCD screen will shows
icon and timer (ie. 0:10) ,
2. Press the
(
)
button again showing next order time on the screen ( ie.0:20), press them again
(ie.0:30)…..and so on.
3. Leave the buttons starting count down then
icon flashes
Note:
1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2
hours maximum.
2.When count down timer showing 0:00 means to turn off the timer.
3.
Press
button for real time indication when the timer is counting down.
10. Out Of Range Indication:
1. If within the range, the
icon will display on the LCD screen.
2. If you are out of range, the
icon will disappear on the LCD screen.
D. TIMER SETTING:
Transmitter Button
Description
Press Transmitter Button
1
Press & Hold the
button for 3 seconds
Timer Setting
(Hour)
*Flash digit for adjusting
for
–
and
for
+
Press the
button once Time setting (Minute)
*Flash digit for adjusting
for
–
and
for
+
2
Press the
button
once.
Alert Alarm Time Setting
(Hour)
*Flash digit for adjusting
for
–
and
for
+
Press the
button once Alert Alarm Time Setting (Minute)
*Flash digit for adjusting
for
–
and
for
+
Press the
button once Alert Alarm Setting ON / OFF
for
OFF
and
for
ON
3
Press the
button once
Count Down Timer Setting
(Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
for
–
and
for
+
Press the
button once Count down Timer Setting (Minute)
*Flash digit for adjusting
for
–
and
for
+
Press the
button once Count down Timer Setting ON / OFF
for
OFF
and
for
ON
4
Press & hold the
button
for 2 seconds.
Daily Timer Start
Timer Setting
Flash
/
icon and “Hours”
for adjusting
for
–
and
for
+
EXIT: Press and hold the
button for 2 seconds or leave it for 10seconds, the system will exit the
programming mode.
1. Timer Setting: Example to AM10:30
1. Press & hold the
button for 3 seconds, with two-melody sound and the “Hours” digit flashes for
adjusting.
2. Press the
or
button to decrease or increase the “Hour” digit until AM
10
:xx
3. Press the
button once again then the “Minute” digit flashes for adjusting.
