User Guide for the Commander Essentials W52P IP DECT Phone
Commander Phone W52P User Guide_GD_42095
39
1.
Press
to enter the main menu.
2.
Select
->System Settings->Base Reset.
3.
Enter the system PIN (default: 0000).
4.
Press the Done soft key.
All individual settings of the base station are reset to factory defaults successfully.
The power indicator LED on the base station slow flashes when resetting the base
station.
1.
Press
to enter the main menu.
2.
Select
->System Settings->Eco Mode+.
3.
Press the Change soft key to check or uncheck the Eco Mode+ checkbox.
4.
Enter the system PIN (default: 0000) and press the Done soft key.
The LCD screen prompts “Are you sure you want to reboot the base station?”.
5.
Press the Yes soft key to reboot the base station.
The base station reboots to make the configuration take effect. The configuration
applies to all the handsets registered to the base station.
Base station reset may take a few minutes. Do not power off until the base station starts
up successfully.
