User Guide
P. 2
Table of Contents
Introduction............................................. 2
Using the Transmitter ............................. 2
Remote-Starting Your Vehicle ................ 2
Vehicle Presets (
Heater & Heated Seat
) 2
Driving Off............................................... 3
Using the Remote Starter ....................... 3
Arming the Starter Kill............................. 3
Idle Mode................................................ 3
Turbo Mode ............................................ 3
Valet Mode Using the Valet Switch (if
installed) ................................................. 4
Ignition Valet........................................... 4
Remote Valet Mode................................ 4
“Home Valet
TM
” Mode ............................. 4
Panic Mode............................................. 5
Quick Lockout
TM
...................................... 5
Cold Weather Mode................................ 5
Advanced Features: Installation-
programmable Options ........................... 5
Remote Door Locks................................ 6
Priority Door Access ............................... 6
Active or Passive Arming........................ 6
The Starter Kill and the Anti-grind Feature
................................................................ 6
Flashing LED .......................................... 6
Safe Start................................................ 6
Home Valet
TM
......................................... 6
Ignition-Controlled Door Locks ............... 6
Ignition Re-lock....................................... 7
Secure Lock............................................ 7
Turbo Mode ............................................ 7
Remote Trunk Release........................... 7
Engine Run Time.................................... 7
Extended Run Time................................ 7
Multi-car Operation ................................. 7
Troubleshooting Transmitting Range...... 7
LCD Remote Functions .......................... 8
Basic Vehicle Operations........................ 9
Transmitter Mode Selection.................... 9
Cold Weather Mode................................ 9
Home Valet
TM
.......................................... 9
Time or Alarm Clock Adjustments ........ 10
Timing Countdown Adjustment............. 10
Safe Start Mode.................................... 10
LCD Transmitter Operation and
Confirmations
(Second Car Control)
..... 11
Missing a Start or a Stop Confirmation. 11
Multi-Level Features (
default state)
...... 12
Accessing the Multi-Level Features and
Other Transmitter Functions................. 12
Diagnostics – Parking Light Flash Table13
Introduction
This is a state-of-the-art remote starter system. The system is packed with advanced features such
as priority access to the driver’s door (commodity features) and the safe start children safety
feature. With many an advanced function, this product will satisfy any one of your expectations
from high-end commodity and security systems, without neglecting any standard feature commonly
offered by entry-level starters.
Using the Transmitter
Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two
independent vehicles equipped with identical remote starters (see
Multi-car operation
section on
page 7).
Remote-Starting Your Vehicle
Press the
START/STOP
button for approx. 1 second. The parking lights will come
ON
to inform you
that the remote starter has received your signal. Approximately 5 seconds later, the engine will
start. The parking lights will remain
ON
during the pre-programmed run time of the engine.
If the vehicle does not start at the first attempt, the system will shut down, wait a few seconds and
try to start the engine again. There will be 3 start attempts before the system gives up.
Vehicle Presets (
Heater & Heated Seat
)
When leaving the vehicle it is recommended to preset the accessory controls in preparation for the
next remote start. Settings for the blower motor (fan), front and rear, as well as heated seats (if
equipped) should not be left on
HIGH
. It is recommended to leave the settings on
LOW
or
MEDIUM
instead.
