4K 8x8 HDBaseT Matrix Switcher
Comm-Tec S.r.l.
11
www.comm-tec.it
4. System Operations
4.1
Front Panel Button Control
The operation examples are showed in
2.1 Front Panel.
Here we make a brief
introduction to the system operations.
4.1.1
Switching I/O connection
1)
To convert one input to an output:
Operation: “input”+““ENTER”
Example: input 1 to output 2
Note: In default status, 8 IR OUT sockets correspond with 8 HDMI INPUTS. When you
convert an HDMI input to an output, the corresponding IR OUT will be switched
synchronously.
2)
To convert an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
3)
To convert an input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: Convert input 1 to all outputs
Note:
Indicators of the pressed buttons will blink green for three times if the conversion
is done, then it will be off. If the conversion failed, they will be off immediately.
4.1.2
EDID Management
4K HDBaseT 8x8 Matrix Switcher features EDID management to maintain compatibility
between all devices. It can be controlled via EDID learning and EDID invoking.
EDID Learning (from output):
Summary of Contents for MTX88UH2
