Modular Matrix Switcher
Comm-tec Srl
33
www.comm-tec.it
6.3.1. System Control Command
Command
Description
Feedback
/*Type;
Get the system model.
xxxxx
/%Lock;
Lock front panel buttons.
System Locked!
/%Unlock;
Unlock front panel buttons.
System Unlock!
/^Version;
Get the firmware version.
Vx.x.x
/:MessageOff;
Disable feedback message
Closed The
Message Return.
/:MessageOn;
Enable feedback message (Default)
Enabled The
Message Return.
Undo.
Cancel the previous operation
Undo
Demo.
Switch to testing mode, switch AV 1>1,
2>2 and so on...
Demo Mode
AV: 01->001
… …
PWON.
Power on the system.
PWON
PWOFF.
Turn the system to standby mode.
PWOFF
/V00.
Get the backboard software version.
Vx.x.x
%0911.
Restore factory default.
All I/O connection will be restored to
straight through: 1->1, 2-
>2… saved
operation status will remain the same.
6.3.2. Signal Switching Command
Command
Description
Feedback
[x]All.
Switch input [x] AV to all outputs.
01 To All
All#.
Switch all input signal to the corresponding
output channel
All Through.
All$.
Switch off all outputs.
All Closed.
[x]#.
Switch input [x] to output [x].
01 Through.
[x]$.
Switch off the output [x].
AV: 01 Closed.
All@.
Switch on all outputs.
All Open.
[x]@.
Switch on the output [x].
01 Open.
[x]V[y1](&[y2]…
.).
Switch input [x] only video to output [y1]
(and all target output in [y2] and so on).
V: 01->001
[x1]B[y1](&[y2]
….).
Switch input [x] AV signal to output [y1]
(and all target output in [y2] and so on).
AV: 01->001
Status[x].
Get the input channel on output [x].
V: 01->001
A: 01->001
Status.
Get the input channel on output channel
one by one.
V: 01->001
A: 01->001
… …c
6.3.3. Preset Command
Command
Description
Feedback
