COMM BOX PTY LTD | ABN: 431 583 817 05 | Telephone: +61 2 9975 6001 | Fax: +61 2 9975 2032
PO Box 6667 Frenchs Forest NSW 2086 Australia | www.commbox.com.au
AUSTRALIA, CHINA,
MALAYSIA, SINGAPORE, KOREA, SOUTH AFRICA
9
Programming a Joey to control an AVBox
In this example, we’ll program the
Volume Up key for an AVBox in a
standalone environment. In other
words, we only have one AVBox.
We’ll assume you have already
created the Volume Up key
graphically.
1.
Set the AVBox address to 0,
i.e. all switches off. This
way we don’t need to send
an address code.
2.
Open the Joey Editor and
the file you wish to work
with.
3.
Select Edit Behaviour.
4.
Double-Click the Volume Up
key.
5.
Click “Add”. The Code
Sequencer window will
open.
6.
In the Codeset drop-down,
choose AVBox. (If this
choice is not available, see
“Upgrading your Joey
Editor” below.)
7.
Choose Volume Up from the
Codes list. Click OK.
Repeat items 4, 5 and 7 for all the
keys that you wish to use to control the AVBox.
Upgrading your Joey editor
If the AVBox choice fails to appear in the Code Sequencer, you can either use the
CommBox code and refer to Table 1 for the code relationships or add it by adding
a file “AVBox.ini” in the “ROMcode” folder in your Joey directory. This file is
available for download at
www.commandsystems.com.au
.
