ComfyGo Mobility Go 6011, User'S Manual & Warranty Card

Page: 19 / 26

Three short beeps, LED lights
blink thrice
Description of LED light The meaning of LED light Explanation & Solution
All LED lights are unlit with no
sound
The power is off, wheelchair is in
standby or sleep mode.
Power is poorly contacted. Fuse is
tripped or burned out.
All LED lights are lit
The power is turned on, and self
diagnose is working, the electric
wheelchair functioning as
intended.
Less LED lights lit, less battery
power remaining.
The leftmost red LED light is lit
The battery power is extremely
low.
Battery is low on power. Charge
immediately. Battery has
malfunctioned, replace battery.
Two short beeps, LED lights blink
twice
The left motor has malfunction. The left motor is poorly connected
or disconnected.
The left magnetic brake is
malfunction.
The left magnetic brake is poorly
connected or disconnected
Four short beeps, LED lights blink
four times
The right motor is malfunction.
The right motor is poorly
connected or disconnected.
Five short beeps, LED lights blink
five times
The right magnetic brake is
malfunction.
The right magnetic brake is poorly
connected or disconnected
Six short beeps, LED lights blink
six times
Controller is in over-current protec-
tion status.
Check the brakes and check if the motor
drive mechanism is stuck. Check the
current by using an ammeter. If it is not
excessive current, the controller may have
malfunctioned.
Seven short beeps, LED lights
blink seven times
Joystick has malfunctioned
Joystick doesn’t reset to center.
Joystick connector is loose.
Eight short beeps, LED lights blink
eight times
Controller has malfunctioned.
Please consult your dealer for
maintenance.
Nine short beeps, LED lights blink
nine times
Controller has malfunctioned.
Please consult service center for
maintenance.
5. System Diagnostics
18