6
1. Turn the heater on or off by pressing the Power button on
the control panel or by pressing the Power button on the
remote control.
Once the power is off, heating elements will stop working
first. The fan will continue working for up to 90 seconds
to dispense residual heat inside the heater. This is a
normal function.
2. Select a heat setting by pressing the HEAT button on either
the control panel or the remote control to toggle between
the three heat settings.
Power for heat-up mode is 1,500 W; heat-down is 750 W.
ECO mode is an Economic Energy Saving Function. When
ECO mode is chosen, the heater will operate to maintain a
constant warm 68ºF / 20ºC.
3. Set the temperature by pressing the arrows on the control
panel or the remote control. You can set the temperature
on the heater anywhere between 50°F and 90°F or between
10°C and 32°C. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
To view the ambient temperature press the ambient
temperature button on the control panel.
Note: Press and hold the ambient temperature button on
the control panel for 5 seconds to switch the digital display
indicator on the heater between Fahrenheit and Celsius.
On the remote, short press the ambient temperature button
to engage Ambient Temperature, long press for 3 seconds
to engage Child Lock.
OPERATING INSTRUCTIONS
1
2
3
HIGH
LOW
ECO
OR
