230
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017
Functions
Macro Function
Macro Function
You can use the macro function to assign digits and various consecutive
commands, for example, for accessing an answering machine remotely or
programming a function on the PBX, to a function key.
Macro Execution Process
Below you find a description of the process based on an example key to
which the command sequence
HZ300CW2Z#22#Lg
has been assigned:
•
Command
Z300
: When you press the macro key, phone number 300
(e.g. answering machine) is entered in the dial preparation.
•
Command
H
: The telephone dials the phone number from the dial
preparation and switches to hands-free calling.
•
Command
C
: The telephone waits for the connection.
•
Command
W2
: After the connection has been established, the
telephone waits another 2 seconds.
•
Command
Z#22#
: The telephone dials the DTMF code #22#.
•
Command
Lg
: The LED next to the function key switches on (green).
Important:
The state of the LED remains the same after a macro is
executed – until the next time the command Lo, Lg, Lr or Ly is executed
with the same key. If the LED is not to be used for status indication, we
recommend you add the command Lo (disable LED) to the end of a
macro.
If you want to stop running the macro, press the
hook
key.
