COMFORTBABY Skydome, User Manual And Assembly Instructions, Page: 2 / 40

Safety and Care instructions:
џ
Assembly will be easier with 2 people.
џ
Please read these instructions fully before starting assembly and keep it for
future reference.
џ
The example crib on the assembly instruction is the crib XL with a mattress
length of 2 meters.
џ
The assembly instructions for the crib L with the mattress length of 1,6
meters are basically identical
џ
On page 4, the assembly instruction for various bed configurations are
shown. For the detailed assembly see page number. This product is
intended to be assembled and used only as described in these
instructions.
џ
To make the assembly easier, the parts are provided with stickers that
have numbers on them (for example: ATH/04). The reference number of the
certain part will be mentioned if this part is being used for the assembly.
The manufacturer is not responsible for the improper assembly of the item.
џ
Check the fasteners periodically and check all components for damages.
џ
Do not use the bed if any components are broken or missing. Before
assembly check parts for shipping damages. After assembly, shipping
damages won't be accepted.
џ
To reduce the risk of injury to children - place the bed on a distance of no
more than 75 mm, or place the bed at a distance more than 230 mm from
the wall. Do not place the bed near to reachable objects as in laces, wires,
curtains etc. to avoid strangling and su ocation.
џ
The upper bunk bed is not recommended for children under 6 years old.
џ
Do not allow children to jump on the bed.
џ
Use always the ladder to climb up to the top bunk or to get o from the
top bunk.
џ
Recommended mattress sizes are 2000x800mm (for bed XL), 1600x800mm
(for bed L).
џ
It is recommended to use the furniture in a ventilated dry room at the air
temperature not lower than +10°C and not higher than 40°C. It is also
recommended to use the furniture at the relative air humidity not higher
than 55%.
џ
The furniture should be protected from direct sunlight, should not be
located near heating appliances.
џ
Furniture surface should be protected from moisture.
џ
The contact of the coating with hot objects and boiling water, as well as
with liquids dissolving the paint and varnish coverings (spirit, gasoline,
acetone etc.) is forbidden.
џ
The furniture cleaning should be to be carried out only with the use of
special cleaning products designed only for such purposes. Dust should be
removed with a dry, soft rag.
2