2
2
www.comfortzoneproducts.com
INTENDED USE
This product is intended for indoor residential and office use only, not
for industrial or other commercial applications. Use only with electrical
wiring that is in good working order and that meets applicable codes and
ordinances. This heater must be plugged into a 120 Volt A.C., 15 AMP
(or larger) circuit. Do not plug anything additional into the same circuit.
If you have any questions whether your wiring is adequate, consult a
qualified electrician. Risk of fire, overheating, malfunction, property
damage, injury or even death may result if not adhered to.
Use your heater only with a working smoke detector located in the
vicinity of your heater.
While using your heater, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we have
used the word "
WARNING
" to indicate the level of hazard:
WARNING
indicates a hazard which, if not avoided, could result in injury or death.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of electric shock, fire, or injury to persons,
including the following precautions:
• Read all the instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Use provided handle when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 feet (0.9 meters) from the front
of the heater and keep them away from the sides and rear.
• Do not use heater unattended. Use of extreme caution is necessary
when any heater is used by or near children, invalids, disabled persons
or pets.
• Do not operate the heater with a damaged power cord or after the
heater malfunctions, has been dropped or damaged in any manner.
Return heater to authorized service facility for examination, electrical or
mechanical adjustment or repair.
• Do not use heater outdoors.
• Use your heater only in dry environments. This heater is not intended
for use in a bathroom, laundry area, or similar locations, or near sinks,
washing machines, swimming pools or other sources of water. Never
locate heater where it may fall into a bathtub or other water container.
Do not use in damp environments such as flooded basements.
• Do not place the heater on a small, unlevel, uneven or any surface
which might allow heater to tip or fall.
• For proper operation, heater should be placed on a smooth,
non- combustible surface. Do not place on rugs, carpet, vinyl flooring
or other plastic surfaces. Not for use outdoors or in wet areas.
• This heater is not designed as a primary heat source.
• Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
Always unplug heater when not in use.
• Do not run power cord under carpeting. Do not cover cord with throw
rugs, runners or similar coverings. Arrange cord away from traffic area
where it will not be tripped over.
• To disconnect heater, turn controls off then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire or damage the
heater.
• To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces like a bed, where openings may
become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or
injury to persons or property.
READ & SAVE THESE
INSTRUCTIONS!
WARNING:
SHOCK HAZARD
Use your heater only in dry environments. This heater is not intended
for use in a bathroom, laundry area, or similar locations, or near sinks,
washing machines, swimming pools or other sources of water. Never
locate heater where it may fall into a bathtub or other water container.
Do not use heater outdoors. Do not use in damp environments such as
flooded basements.
WARNING:
HOT SURFACES
Do not touch body of heater when in use. This heater is hot when in use,
to avoid burns, do not let bare skin touch hot surfaces. If provided, use
handles when moving this heater.
WARNING:
FIRE HAZARD
Heater has hot and arcing or sparking parts inside. Do not use near
combustible materials or flammable gases or sources of heat. Do not
use in areas where gasoline, paint or flammable materials are used or
stored. Keep combustible materials such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 feet (0.9 meters) from the front
of the heater and keep them away from the sides and rear. To prevent a
possible fire, do not block air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where openings may become blocked.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock, fire, or damage the heater.
WARNING:
ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use with adequate electrical
system that is up to code.
The supply cord has a polarized plug. As a safety feature this plug will fit
in a polarized outlet only one way. To prevent electric shock, match wide
blade of plug to wide slot, fully insert plug. If the plug does not fit contact
a qualified electrician.
Do not operate any heater with a damaged cord or plug or after heater
malfunctions, has been dropped or damaged in any manner. Do not
operate heater with a broken heating element or ceramic cone or any
visual imperfections. For repairs covered under warranty, see warranty
statement. For all other repairs contact Comfort Zone
®
Customer Service
by telephone or mail for information and assistance.
PET OWNERS NOTE:
The health of birds and some small pets are extremely sensitive to the
fumes given off during the initial use of many appliances. Although these
fumes are not harmful to humans, it is recommended that this heater
not be used around birds and small pets during its initial use until the
manufacturing corrosion coatings burn off.
