Comfort Heat 19115970, Manual, Page: 9 / 46

9
9. ERROR CODES
E0
: Internal fault. Heating is shut off.
E1 : Built-in sensor fault.
The sensor application is changed to C (regulator).
E2 : Externally wired floor sensor or externally wired room sensor fault. (The
sensor is either damaged, or has short-circuited or disconnected).
The sensor application is changed to C (regulator).
If AF is used - the sensor application is changed to A (internal room sensor).
E5 :Internal overheating. Internal overheating. If the E5 error persists, please
contact your installer.
Environment and recycling. Please help us protect the environment
by disposing of the packaging in accordance with national regulations
for waste processing.
Recycling of obsolete appliances. Appliances with this label must
not be disposed of with general household waste. They must be
collected separately and disposed of in compliance with local regulations.
10. WARRANTY
Warranty period for thermostat Comfort ECO is 36 months. Warranty is valid if
the following documents are presented:
1. Warranty coupon (filled in correctly);
2. Document of purchase: invoice or receipt;
3. The obligation of Comfort Heat will be repair or supply a new unit, free
of charge to the customer, without secondary charges linked to repairing
the unit.
The Comfort Heat warranty does not cover installation made by unauthorised
electricians, or faults caused by incorrect designs supplied by others, misuse,
damage caused by others, or incorrect installation or any subsequent damage
that may occur. If Comfort Heat is required to inspect or repair any defects
caused by any of the above, then all work will be fully chargeable.
The Comfort Heat warranty is void, if payment for the equipment is in default.