Comfort audio Comfort Digisystem DM10, User Manual

Page: 10 / 24

10
Microphone DM-10
Pairing (Connector DT-10)
The connector cannot send information, only receive
it. To activate the position Receive info , the connector
must be in operation (position I or II) and connected to an
operating hearing aid. The selector is then quickly moved
to position 0 and back to the operating position (I or II).
The connector can now receive pairing info. If no info is
received by the connector, after a short time this returns
automatically to the previous setting.
Function
Here you can adjust the function button. If no choice
has been made, the microphone sends continuously the
sound it takes up.
More settings are possible, see below. The chosen set-
ting shows in the display. For more information about the
function indicator see
More functions.
Silence button
In this setting you can shut off the microphone so that no
sound is sent when you press the function button.
Push to talk
DM-10 only sends when you press the function button.
Push/Cont
In this setting DM-10 works like described above under
Push to talk, but by pressing the menu control down
(scrolling down) the microphone is switched to send con-
tinuously the sound it takes up.
This function may be useful when it is impossible to press
the function button, e.g. during lectures or presentations
etc.
FCR (Free Channel Request)
This function prevents DM-10 from sending on frequen-