manualshive.com logo in svg

COMFORT-AIRE PSH-141A, Installation, Operation & Maintenance Manual

Share
Download
COMFORT-AIRE PSH-141A Installation, Operation & Maintenance Manual Download Page 12

12

Installation, Operation & Maintenance 

PSH-141A

 

AITONS EQUIPMENT

INSTALLATION  INSTRUCTIONS

Exhaust hose installation:

     The exhaust hose and adaptor must be installed or removed

     in accordance with the usage mode. 

         

          

     1.  Install the adaptor onto the exhaust hose as shown in Fig.16. 

          Refer to the previous pages for window kit installation.

     2.  Insert the hook of the Exhaust hose into the hole seat of the 

          air outlet and slide down the Exhaust hose along the arrow

          direction (See Fig.17) for installation.

     

     

IMPORTANT:

     DO NOT OVER EXTEND OR BEND THE EXHAUST HOSE 

Fig.17

Fig.16

           COOL,HEAT or  AUTO mode

            FAN, OR DEHUMIDIIFY or mode 

     Install

     Remove

CAUTION:

     Make sure that there are no obstacles around the air outlet of

     the exhaust hose provide at least 1.5ft.(500mm) clearance 

     in order for the exhaust system to work properly.

Hole seat

Hook

Summary of Contents for PSH-141A

















Reviews:

No comments

Brands by name

Popular brands

Load more brands