Owner’s Manual - 9”
Plastic Window Fan
2
IMPORTANT SAFETY INSTRUCTIONS
Read Rules for Safe Operation and Instructions Carefully
WARNING, RULES FOR SAFE OPERATION, USER SERVICING INSTRUCTION, CLEANING:
1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safely feature.
2. To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control devices.
3. Do not leave the fan running unattended.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. Ensure that the fan is switched off from the supply mains before removing the grille.
5. Automatically operated device - to reduce the risk of injury, disconnect from power supply before servicing.
6. To reduce the risk of personal injury and electric shock, it should not be played with or placed where small children can
reach it.
7. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for
examination and/or repair.
8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic area where it will not be tripped over.
9. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product
marking for proper fuse rating) and check the products. If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or returned to an authorized service facility for examination and/or repair.
Window Installation
1. Pull four clamps of the window body,
adjust the length of the stretching baffle
according to the width of the window,
then compress the four clamps, and fix
the length of the baffle. The stretching
length of the unilateral stretching baffle
is 0-7 in. (0-180mm)
2. Place the window body on the window
lattice, and pull down the window to be
clamped in the window body.
INSTALLATION INSTRUCTIONS
Name of components
Fan body
Control panel
Screw
Expandable panels
feet
Control lever
Clip
