COMFORT-AIRE Century 7602-536A, Installation Manual, Page: 12 / 14

Swing Settings
LCD Will Show
Cooling Swing
(SYSTEM COOL)
The swing setting,
often called“cycle rate”,
“differential” or
“anticipation” is
adjustable. A smaller
swing setting will cause
more frequent cycles
and a larger swing
setting will cause fewer
cycles.
The cooling swing
setting is adjustable
from 0.2˚ to 2˚. For
example: A swing
setting of 0.5˚ will turn
the cooling on at
approximately 0.5˚
above the setpoint and
turn the cooling off at
approximately 0.5˚
below the setpoint.
Heating
Swing
(SYSTEM
HEAT)
The swing setting,
often called“cycle rate”,
“differential or
“anticipation” is
adjustable. A smaller
swing setting will cause
more frequent cucles
and a larger swing
setting will cause fewer
cycles
The heating swing
setting is adjustable
from 0.2˚ to 2˚. For
example: A swing
setting of 0.5˚ will turn
the heating on at
approimately 0.5˚
below the setpoint and
turn the heating off at
approximately 0.5˚
above the setpoint.
1.Set the thermostat system switch to the desired position (COOL or HEAT).
2.Press and hold “+”and “-”together for 3 seconds.
3.Use “+”and “-” to adjust desired swing setting (The display reads in tenths
of a degree.)
4.To exit,move system switch or wait for 1 seconds.
Cool Swing
Heat Swing
2. Transmi er: Turn the SYSTEM switch to OFF. Press and hold“+” and “-”
together for 3 seconds to access the interface of room temperature
calibra on. Press and hold“+” and “-” together un l“LE” is displayed on
the LCD.Then press and hold "+" for 3 seconds , the transmi er will
transmit the code signal. When the red LED on the receiver stops flashing,
indica ng that the code is successful.
RF
Pairin
1.Receiver: Use a slender object into the hole and keep it depressed (for
approximately 5 seconds) un l the red LED starts flashing.
Swing Se ng