Owner’s Manual
REMOTE CONTROLLER
7
How to use the buttons
Ensure power is available to the unit. The OPERATION
indicator on the display panel of the indoor unit illumi-
nates.
1. Press the
MODE
button to select Auto.
2. Press the
TEMP
button to set the desired tempera-
ture. The temperature can be set within a range of
62°F (17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the
ON/OFF
button to start the air conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically choose the
mode of Cooling, Fan, Heating and Dehumidifying by sens-
ing the difference between the actual ambient room temper-
ature and the set temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed. It is
automatically controlled in this mode.
3. If the Auto mode is not comfortable for you, the desired
mode can be selected manually.
Auto operation
Cooling/Heating/Fan Operation
Ensure power is available to the unit.
1. Press the
MODE
button to select COOL, HEAT (cool-
ing & heating models only), or FAN mode.
2. Press the
TEMP
button to set the desired tempera-
ture. The temperature can be set with a rnage of 62°F
(17°C)~88°F (30°C) in 2°F (1°C) increments.
3. Press the
FAN SPEED
button to select the fan speed
in four steps–Auto, Low, Med or High.
4. Press the
ON/OFF
button to start the air conditioner.
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller. In fan only mode, the fan creates a
breeze without cooling or heating the room. To cool or heat
the room, cooling or heating modes need to be selected
rather than fan only.
3
2
1
3
2
1
4
Comfort-Aire by Aitons Equipment
