5
Setup and Opera�on
Note:
This product produces a warming heat. It is not intended to be used as a therapeu�c
hea�ng pad. Please allow a few minutes to reach maximum temperature.
The maximum temperature: approx 140F.
Controller instruc�ons
Digital Display
Screen
Tempe
1. Plug into an electric outlet,
The digital screen will show , and
a�er 1 second, will disappear and
the hea�ng pad is on standby mode.
2. Press the Power bu�on to turn on
the hea�ng pad.
Press the Tempe / - Bu�on to
select the heat between 1-6 levels.
(Default se�ng is level 3.)
Temperature -
Power Button
When setting up your heating wrap,be sure to follow these steps in order.
1. Place the Hea�ng Wrap on the shoulder and buckle the bu�on on the armband.(
Img.1
)
2. Connect the power cable to the connector on the heated wrap. To connect the cable
to the connector, align the connector and cable arrows and push gently un�l it locks.
CAUTION:
The cable must be fully plugged in. A loose connec�on could cause a fire
hazard.(
Img.2
)
3. Plug the power cord into an electric outlet(120V/60Hz).
4. Make sure all cords are tangle free and not trapped or pinched in any way.
5. Do not wrap the controller in the heated product while in use.
6. Do not use with generator power.
7. Turn on the device by opera�ng the controller (refer to controller instruc�ons.).
8. To disconnect the controller, first unplug the cord from the outlet, then pinch sides of
the connector and pull apart.
(
Img.1
)
(
Img.2
)
