background image

 

s

n

o

it

u

l

o

S

 t

l

u

a

F

Massage heads rotating at 

reduced speed. 

The load on the massage heads is excessive. Reduce 

load and try again. 

Device switches off suddenly 

 Device may have been in use for 15mins. Auto-shut-

off function activated. Continue using by pressing the

 

‘On’ button after resting the unit for 15mins. 

Over-heat protection function activated. Device is 

switched off for your safety. Please rest device for 15-

30mins before restarting. 

Device fail to start 

If so, let device rest for 15mins before continuing. 

Device may require longer time to cool in warmer  

environments. 

Check if adapter is plugged into socket. 

Check if adapter output is connected to device 

power inlet wire. 

Jerky motion of massage heads / 

Vibrations from device 

Excessive pressure may have been applied onto the 

device. Reduce the load and try again. 

Check if device has been used for more than 15mins. 

5

Care and Cleaning Instruc�ons

1. Do not wash in washing machine or immerse the product or the adapter in water.

2. Always switch off before cleaning and remove the adapter from the socket with

    

clean, dry hands.

3. The massager should be wiped with a slightly moist cloth and dried thoroughly. 

    

Do not wipe the product with alcohol or harsh chemicals such as thinner or bleach.

4. Do not apply excessive pressure or impact onto massager/massage heads.

    

Applica�on of a direct force in excess of 110 lbs. may damage your massager and

    

invalidate your warranty. Refrain from over usage of the device.

5. Store the massager in a cool, dry place out of reach of children. 

6. Avoid contact with sharp edges or pointed objects which might cut or puncture

    

the fabric surface.

TROUBLESHOOTING GUIDE

Summary of Contents for CF-6609









Reviews: