8
Instructions for button battery of controller
Ensure button battery CR2032 has been properly installed in the
remote control, as shown below, use one coin or straight screwdriver
to unscrew battery cover at the groove, then make the positive side of
button CR2032 upward, put it in the battery house of remote control,
and insert the positioning pin on the top of the battery cover, then
press the battery cover tightly.
Installation Diagram
1.The remote controller is powered by Model. CR2032 button battery.
It is not rechargeable battery, it can be used for about 3months
(30min each day).
2.When the LCD backlight becomes dim or Pressing the buttons to
control the massager is not sensitive, it indicates that the battery
capacity is low,please replace it with a new battery;
3.Take out the battery if the Product is not used for a long time.Or
The controller may malfunction due to battery leakage.
4.Please do not use the battery other than specified one.
5.Do not misplace positive and negative electrodes of the battery,
please place positive up and negative down.
The method of remote control battery installation
