3
Setup and Operation
1. Conned the adapter cable to the cable on the foot massager.
Note:
2. Plug the home adapter into an electric outlet.
3. Turn on the device by operating
remote control
(refer to controller instructions.).
4. When finished unplug the adapter from the outlet.
•
The device will automatically switch off after 15 minutes timer run out.
•
Do not setup or use the device in a bathroom or similary wet/damp areas.
•
Ensure the device is not exposed to direct sunlight or placed near sources of heat.
This product produces a warming heat. It is not intended to be used as a therapeutic
heating pad. Please allow a few minutes to reach maximum temperature.
The maximum temperature: approx 130F.
Controller instructions
Rotation
Heat
（
On/Off
）
Reverse Rotation
Power:
Press to turn the
device on or off.
