Dishwasher Maintenance
After Every Wash
After every wash, turn off the water supply to the
appliance and leave the door
slightly open so that moisture and odors are not trapped inside.
Cleaning Best Practices
To clean the exterior and rubber parts of the dishwasher, do not use
solvents or abrasive cleaning products. Only use a cloth with warm soapy
To remove spots or stains from the surface of the
interior, use a cloth
dampened with water an a little
vinegar, or a cleaning product made
specifically for dishwashers.
When Left Unused
It is recommend that you run a wash cycle with the
dishwasher empty and then
unplug from power, turn off the water supply and leave the door of the
appliance slightly open. This will help the door seals last longer and prevent
odors from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in
vertical position to prevent water
If transporting a long distance drain water from the interior tank and hoses:
-25-
NOTE
to remove power.
water.
Before cleaning or performing maintenance, always unplug the dishwasher
simultaneously to drain the water tank.
3.
In standby mode,press and hold NORMAL RAPID button for 3 seconds
from draining from the dishwasher.
a catch pan under the connections before removing the hoses to catch any water ).
1.
Drain water from interior tank
in the sump.
2.
Disconnect water inlet and drain hoses from the back of the dishwasher (place
Remove the filter at the bottom of the tub and use a sponge to soak up water
Summary of Contents for CDC17P0ABB
Page 17: ...Adding detergent Detergent Cup 17...
Page 32: ......
