Comeup Cub 2s, Manual, Page: 2 / 4

X
Wire rope replacement
．
It is very important that the winch will be mounted on a flat and hard surface
of base plate in order to make sure the motor, drum and gearbox housing
are aligned correctly.
．
Hawse fairlead does not mount to winch directly.
．
The Synthetic rope shall be wound in an under-wound orientation only.
．
Four (4) M8 x 25L 8.8 grade high tensile steel bolts must be used in order
to sustain the loads imposed on the winch mounting.
．
Two (2) M8 x 20L 8.8 grade high tensile steel bolts must be used for
fastening the roller fairlead into the base plate.
X
Wiring Diagram
Attach the black lead firmly to the negative ( – ) battery terminal and red lead
to the positive (+) battery terminal. The voltage drop for the winch motor
must not exceed 10% of the nominal voltage of 12V DC.
X
Nut fastening for motor & contactor
1. Holding the lower nut on the stub and fastening the upper nut clockwise.
2. The torque setting for nut is 5.7 N-m / 50 lb-in.