24
6. Installation and commissioning
6.1. Requirements concerning the installation location
6.1.1. Installation location
•
The surface of the location must be even and flat.
•
When choosing the installation location the following must be kept in mind: coolant inlet
and coolant outlet connections must be easily accessible and all hoses must be installed
without sharp bends.
6.1.2. Environmental conditions
NOTE
Risk of damage through unsuitable environmental conditions!
Damage to unit and corrosion damage may result and are not covered by manufacturer’s liability.
The unit is only authorized for use in indoor environments.
The unit must not be stored or operated in aggressive, humid environments.
The unit must not be stored or operated outdoor.
Environmental conditions: see "Technical specifications"
6.1.3. Infrastructure
The following infrastructure is required for connecting the unit:
Parameter
Rated value
Operating voltage
230 VAC + 10% / - 15%, 50/60 Hz
6.1.4. Placing the unit
Place the unit in a way that the air flow of the cooling air for the motor is not restricted. Otherwise there
is a risk that the motor will overheat. The clearance with the wall of the unit is shown in the figure 5.
Figure 5: Required clearance with the wall of the unit
(1) Air intake to the motor
