Multi PRO – Operating Manual
97
10.7.1
Manual Wash
Touching the "Maintenance" button reproduced on the
right in the screen shown in Figure 123 will display the
screen (shown in Figure 124 below) allowing to
enable/disable the manual washing mode.
Figure 124
The manual mode state is displayed at the top left of the screen.
To enable the manual mode, first of all set the date and time on which you wish the function
to automatically be disabled by touching the buttons "Ending year", Ending month", "Ending
day", "Ending hour" and "Ending minute" and entering the desired value for each of them, then
touch the "Enable" button.
An indication at the top left of the screen will inform you that the manual mode is enabled, as
shown in Figure 125 below.
Figure 125
In any case you can disable the manual mode before the specified date and time, by simply
touching the "Disable" button.
