2
•
The kit is pre-configured, the cameras will automatically connect to the NVR
and will be displayed on the screen
•
The default User is admin, the default Password is blank (leave the field empty,
simply click on OK)
•
The default IP address is 192.168.1.114 (DHCP function is enabled by default)
•
In the Network menu, after clicking on the "Show QR code" button, you can find
the QR code to use in the app Comelit View S (available for iOS and Android)
•
Once logged in, the wizard mode start and will assist you in basic configuration
•
If there are obstacles between the NVR and camera, adjust the camera position
or the NVR position to avoid it
•
Operating distance up to 50m indoor and up to 250m outdoor (in free field),
depending on the environment and building materials of the walls. The walls
(including metal garage gate) absorb Wi-Fi signal. Use extra extendable Wi-Fi
antenna to bring camera's antenna inside the wall
•
Keep camera and NVR's antennas parallel to get better signal
•
If one or few cameras are out of Wi-Fi range, use standard CAT5e cables to
connect them to the NVR's WAN port.
Statement
The instruction is for guidance only. Detailed information is in accordance with the product.
The instruction may include some technical inaccuracies or typographical error thought it is prepared
with our every effort.
The product or procedures described in the instruction may be changed or updated at any time
without advance notice.
For any doubts or to request documents about latest procedures and complementary notes, please
consult with the after-sales service department.
Precautions
The followings describe information about correct usage and risk prevention as well property loss
prevention to be strictly followed.
Please use the devices in an environment within allowable temperature and humidity.
Check if the power supply works normally before operation.
Do not furiously strike on the product and be careful not to fall it over.
Do not install the product in a place with strong electromagnetic radiation.
Do not place a container or others with liquid on the product or allow liquid flowing into inside the
product.
Do not disassemble the product without authorization.