•
Avoid direct sunrays
•
Avoid fixing the detector in spots exposed to atmospheric agents (rain, wind, big thermical changes ecc…)
•
Avoid fixing the detector near reflecting objects that might influence it (puddle, glass, strobe lights etc..)
•
Install the detector at a distance of at least 5 cm from useful shutters / blinds / mosquito nets / windows
•
Where it is not possible to respect these distances it is recommended to disable the anti-blinding (DIP2 in ON).
•
Do not install near an air conditioner or heat exchangers that may cause temperature fluctuations
•
Insert the battery in the transmitter and wait about 10 seconds.
•
Make sure that the transceiver is in the learning mode in accordance with instructions from the control panel
programming alarm Comelit.
•
Make a transmission by pressing and releasing the "tamper" detector; This starts in the data transmission of "learning"
from the device to the transceiver control panel.
EXAMPLE OF DETECTION AREA
35°
120 cm
50 cm
2
0
0
c
m
FRONT
VIEW
LATERAL
VIEW
EXAMPLE
WARNINGS
FIRST INSTALLATION