COMELIT-PAC Limited
www.comelitgroup.com
Waterside Court, 1 Crewe Road
Manchester, ME23 9BE - UK
Comelit-PAC Ltd trading as Comelit-PAC.
Registered in England. Company No. 04311885.
Registered office: Unit 2B, The Quad,
Butterfield business park, Luton, Bedfordshire. LU2 8EF
T +44(0)1614063400
To perform a reset:
1. Hold down the One Touch button while first powering the unit
2. Keep your finger on the One-Touch button for 10 seconds
3. Release the One Touch button
The unit is now fully reset and in DHCP mode ready to accept a DHCP generated IP address or a static
IP address from the Access Central software.
5.
Programming a Reserved DHCP Address (recommended)
It is recommended to ensure reliable communications that the controller uses a reserved DHCP IP
address. If the controller is placed on a network where only static addresses are possible, please see
further down this document which provide instructions on programming a controller with a static IP
address.
Before the controller is powered up the installer should contact the customers IT department and
request a ‘
Reserved DHCP Address’.
The customers IT department will require from the installer the
MAC Address of the controller, this is provided with the controller on a sticker as shown in the example
below:
This number is unique to every network device in the world!
Once the IT department have the MAC address, they will then advise of the IP address, Subnet and
Gateway address if required to allow this to be programmed into Access Central.
As the door controller comes out of the box set to accept a DHCP address once the controller is
powered up and plugged into the network, the controller can be programmed in the access software
and communications should be established.
