Comelit KAE0061 Technical Manual Download Page 2

2

Warning

Table of contents

Package contents ............................................................................ 3

Transformer art. 1200 ...................................................................... 4

Description ...............................................................................................4

External unit art. ET0001 ................................................................. 5

Description ...............................................................................................5
Installation ................................................................................................6

Nameplate holders ..............................................................................6

Internal unit art. 2712W ................................................................... 7

Description ...............................................................................................7
Installation ................................................................................................8

Wiring diagrams............................................................................... 9

Standard system ......................................................................................9
Using pushbutton 2 for various usages .................................................9
Connection of call repetition device ......................................................9

Operating distances ........................................................................ 9

Intended use

 

This Comelit product was designed for use in the creation of audio and video communication systems in residential, 

commercial or industrial settings and in public buildings or buildings used by the public.

Installation

 

All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with 

careful observation of the indications provided in the manuals / instruction sheets supplied with those products.

Wires

 

Disconnect the power supply before carrying out any operations on the wiring. 
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system 

manual.

 

We advise against running the system wires through the same duct as the power cables (230V or higher). 

Safe usage

 

To ensure Comelit products are used safely:

 

• carefully observe the indications provided in the manuals / instruction sheets

 

• make sure the system created using Comelit products has not been tampered with / damaged.

Maintenance

 

Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance 

with the indications provided in the manuals / instruction sheets.

 

Any repair work must be carried out

  

• for the products themselves, exclusively by

 Comelit Group S.p.A

.,

 

• for systems, by qualified technical personnel.

Disclaimer

 

Comelit Group S.p.A.

 does not assume any responsibility for

 

• any usage other than the intended use

 

• non-observance of the indications and warnings contained in this manual / instruction sheet.

 

Comelit Group S.p.A. 

nonetheless reserves the right to change the information provided in this manual / instruction 

sheet at any time and without prior notice

Summary of Contents for KAE0061











Reviews: