- 3 -
Wall-mounted installation
Fix the switch on the wall with 2 screws
Turn ON the switch
When powered, the switch start automatically, the led lights up as follows:
-
the Power led lights up
-
the data led blink for one second (represents the system reset)
Note:
make sure that the voltage is correct before power ON, otherwise the switch will be damaged.
Specifications
Supported standards
IEEE802.3, IEEE802.3u, IEEE802.3ab ,IEEE802.3az, IEEE802.3x,IEEE802.3af,
IEEE802.3at
Network cables
1000BASE-
T: UTP category 5e cable (≤100m)
10BASE-
T: UTP category 3,4,5 cable (≤100m)
100BASE-
TX: UTP category 5 cable (≤100m)
MAC address table
4K, auto-learning, auto-aging
Transfer mode
Store-and-Forward
Frame forward rate
10Base-T: 14881pps/port
100Base-TX: 148810pps/port
1000Base-TX: 1488095pps/port
Switching capacity
20Gbit/s
Dimensions (L x H x D)
220 x 44 x 150mm
Fan
1
Power supply
100~240VAC, 50/60Hz
PoE ports
1~8
PoE power on RJ45
Mode A: pin 1/2 (+), pin 3/6 (-)
PoE power output
55VDC/32W (max)/port
PoE power budget
120W
Temperature
Operating: 0°C ~ 40 °C (32 °F ~104°F )
Storage: -40 °C ~ 70 °C (-40 °F ~158°F )
Humidity
Operating: 10% ~ 90% non-condensing
Storage: 5% ~ 90% non-condensing
