Comelit IPSWC162A Manual Download Page 4

Page: 4 / 78

Chapter 1 Product Introduction

Congratulations on your purchasing of the Web Smart Ethernet Switch. Before you install

and use this product, please read this manual carefully for full exploiting the functions of

this product.

1.1 Product Overview

This is a Web Smart Ethernet Switch with 16-10/100/1000Mbps Auto-Negotiation RJ45

ports +2-SPF ports. All UTP ports support Auto MDI/MDIX function. The Switch provides

the seamless network connection, which integrates 1000Mbps Gigabit Ethernet, 100Mbps

Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package.

The Web Smart Ethernet Switch can be configured by web based interface. Including

administrator, port management, VLAN setting, each port statistics, STP setting, QoS

setting, security filter, configuration/ backup/recovery, log out, and so on.

This Switch has the easy-to-use and high performance qualities.

1.2 Features



Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z,

IEEE 802.3ad standards



Supports IEEE 802.3x flow control for Full-duplex mode and backpressure for

Half-duplex mode



Supports MAC address auto-learning and auto-aging



Operates in store and forward mode



Support SNMP/RMON/TELNET



Supports IEEE 802.1q VLAN, 4K VLAN Table



Support IEEE 802.1p Priority Queues



Support ACL Function, 1.5K-entry ALC table



Support Storm Control



Support QoS, Port Mirroring, Link Aggregation Protocol



LED indicators for monitoring power, link/activity



Support web-based Management



Internal power adapter supply

1.3 External Component Description

1.3.1 Front Panel

The front panel of the Switch consists of 16 x 10/100/1000Mbps RJ-45 ports, 2 x SFP

ports, 1 x Console port, 1 x Reset button and a series of LED indicators as shown as

below.

Summary of Contents for IPSWC162A















































































Search results

Summary of Contents for IPSWC162A

Reviews:

Brands by name

Popular brands

Comelit IPSWC162A, Manual

Search results

Summary of Contents for IPSWC162A

Reviews:

Brands by name

Popular brands