HD Decoder User Manual
4
2
Login
The login settings are as follows.
①
Make sure the PC and decoder are connected to the LAN.
②
Find the IP-Tool from the CD and then install it on your computer.
③
Run the IP-Tool. Then the decoder can be searched. If the decoder can’t be searched,
please check whether the PC and the device are connected to the network or not. Click the
device to check its detail information as shown below.
④
Modify the IP address. Click the information of the decoder listed in the above table to show
the network information. Modify the IP address and gateway of the decoder and make sure its
network address is in the same local network segment as the computer’s. Please modify the IP
address of your device according to the practical situation.
Double click the decoder information in IP-Tool or directly enter IP address in the web browser
to access. Here we take IE client for example.
Username
：
The default username is admin.
Password
：
The default password is 123456.
Enter the default username and password and then click [Login].
Summary of Contents for DEC0804
Page 1: ...HD Decoder User Manual...
