22
5.2 CVBS (& S-Video) Mode
Press the MENU button to display the Main Menu Settings. The follow setup menu appears.
• Volume, Contrast, Brightness
Change the Volume, contrast & brightness according to personal preference.
• Color
Used to minutely adjust colour
• Tint
Adjusts all the colours on the screen, but is most noticeable to the eye in reds and yellows, and is also usually set
for pleasing face tones. (Appears in NTSC mode only).
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Advanced Menu
Under Scan adjusts the image size. (ON/OFF)
Anti Burn: This is to prevent the pixel burn on LCD after the use of
display for a long time.
You can turn it on in normal mode or Underscan mode.
– ON in normal mode: 55minutes (normal screen) –> 5minutes
(underscan screen) –> 55minutes (normal screen).
Automatically being iterating.
– On in underscan mode: 55minutes (underscan screen) –> 5minutes
(normal screen) –> 55minutes (underscan screen).
Automatically being iterating.
TNR (Temporal Noisy Reduction) strength is activate this feature to
reduce any noisy signal that may appear on the screen.
(LOW / Mid / High)
Filter is used enable or disable the Luminance Filter function
L/L Mode choose ON/OFF function reinforce the L/L (line Lock) function
NOTE: It is recommended to use this function if there are some
twisting vertical line with Line-Lock camera.
Color is select picture Color level (Neutral / VIVID / Individual)
Advanced
Under scan
OFF
Anti Burn
OFF
TNR strength
Mid
Filter
ON
L/L Mode
OFF
Color
Dynamic Contrast
Color Temp
Recall
No
Main menu
Volume
0
Contrast
64
Brightness
68
Color
+64
Tint
0
Sharpness
+6
Advanced
OSD Menu
Source
CVBS1
