1
2
3
4
5
__IRON MICROSWITCH
__IRON THERMOSTAT
__FILLING TOP
__KNOB TO ADJUST THE STEAM FLOW
__WATER WARNING LIGHT
__STEAM WARNING LIGHT
__BOILER ON/OFF SWITCH
__IRON ON/OFF SWITCH
__PLUG
6
7
8
9
The steam generator Compacta has been designed to iron any kind of fabric in
a professional way by means of a steady steam system.
INSTRUCTIONS
WARNINGS AND SUGGESTIONS
N.B. REGULAR MAINTENANCE OF THE UNIT
a) Screw off the filling top (3) and fill the boiler with no more than 1,4lt of standard
water. Screw on the top mildly.
b) Connect the plug (9) to a 220v, earthed power point.
c) Press the boiler on/off switch (7) to have the boiler come on, press the iron
on/off switch (8) to have the iron come on.
d) Adjust the iron thermostat (2) between linen and cotton position (linen position
is recommended when dry steam is needed, whereas coton position is when
damp steam is needed).
e) Before any ironing, please wait for the steam warning light (6) to belit. Should
the warning light go off while you iron, please go on with your work: the warning
light will come on automatically as soon as the steam has been available again.
f) Press the iron micro switch (1) to have the steam coming out from the iron.
g) Use the knob (4) to adjust the steam flow released from the iron.
- Never overfill the boiler.
- Never screw off the filling top (3) as long as the boiler is under pressure.
- Before screwing off the filling top (3), make sure that no more steam is still inside
the boiler.
- Never leave the unit unattended for long when it is on.
- When the steam is defenitely over, unplug the unit. Please wait for 20 minutes
and screw on the filling top (3) very carefully. Refill the boiler and repeat the
instructions above.
To clean the boiler, please drain it from time to time by reversing the unit and
letting water out by the filling top(3).
(NEVER CARRY OUT THIS OPERATION WHEN THE UNIT IS UNDER
PRESSURE).
REFERENCES
(3)
Pag.
H O W
T O
O P E R A T E
T H E
U N I T :
D
I
S
E
G
N
O
I
L
L
U
S
T
R
A
T
I
V
O