Come.up Winch DV-6000L, Instruction Manual

Page: 4 / 12

II. Performance Data
Performance
Model DV-6000S DV-6000L / DV-6000SL
Line pull ( kg / lb) 2,722 / 6,000 2,722 / 6,000
Line speed (mpm / fpm) 2.0 / 6.5 2.0 / 6.5
1
st
layer
Rope cap ( m / ft) 3.6 / 11.8 6.7 / 22
Line pull ( kg / lb) 2,264 / 4,991 2,264 / 4,991
Line speed (mpm / fpm) 2.4 / 7.8 2.4 / 7.8 2
nd
layer
Rope cap ( m / ft) 7.8 / 25.6 14.7 / 48.2
Line pull ( kg / lb) 1,938 / 4,273 1,938 / 4,273
Line speed (mpm / fpm) 3.1 / 10.1 3.1 / 10.1 3
rd
layer
Rope cap ( m / ft) 12.8 / 42 24 / 78.7
Line pull ( kg / lb) 1,694 / 3,735 1,694 / 3,735
Line speed (mpm / fpm) 3.7 / 12.1 3.7 / 12.1 4
th
layer
Rope cap ( m / ft) 18.5 / 60.7 30 / 100
Line pull ( kg / lb) 1,505 / 3,318
Line speed (mpm / fpm) 4.2 / 13.7
5
th
layer
Rope cap ( m / ft) 24.4 / 80
Line speed and Amp. Draw Main Components
At the first layer of wire rope on the drum
Ⅲ Ⅲ Ⅲ Ⅲ
. Installation
Before using the winch, make sure all electrical components have no corrosion or damaged; the
environment should be clean and dry. The voltage drop from the battery connections to the winch
must not exceed 10% of the nominal voltage under normal operating condition.
Mounting
1. It is very important that the winch shall be
mounted on a flat and hard surface in
order to make sure the motor, drum and
gearbox housing are aligned correctly.
2. It is recommended that you use a
mounting channel to prevent from
damaging winch or vehicle.
3. Four (4) M10 x 1.50 pitch 8.8 Grade High Tensile Steel
Bolts must be used in order to sustain the loads imposed on the winch mounting.
4. Two(2) M12x1.75 pitch 8.8 Grade High Tensile Steel Bolts must be used for
fastening the roller fairlead into the mounting channel.
Line Pull Line Speed Amp
Kg lb mpm fpm 12v 24v
0 0 8.0 26.2 60 35
907 2,000 5.2 17 150 90
1,814 4,000 3.1 10.2 240 140
2,722 6,000 2.0 6.5 300 200