Connecting The Stations 7
Installing The Digital Station Board
IMI89–267
Station Board 50-Pin Connector
Snap a ferrite block around each station cable.
Route the station cable to the station termination
(typically a type 66M-xx connector block).
Punch down the station wiring
on the 66M-xx connector block.
Route the house wiring for the stations from the
station termination to individual station jacks
(typically 625A-4 modular wall jacks).
6 5 4 3 2 1
TI
RI
R2
T2
GREEN
RED
Front
View
Of Jack
1 No Connection
2 No Connection
3 Ring 1-Red Wire-Voice
4 Tip 1-Green Wire-Voice
5 No Connection
6 No Connection
Station Site
station.cdr
Making A Station Connection
