Comcater ACS122, Instruction Manual

Page: 5 / 26

instruction for the user
5
INTRODUCTION
1. Please read carefully the remarks contained in this manual, as they confirm important
information for the correct installation, use and maintenance. Keep this manual for future
reference by the staff.
2. After removal of the packing, check the machine is not damaged and is complete. In case of
any doubt, do not use the machine and contact the service technician. The packing case
(plastic bags, expanded polystyrene, nails etc.) must not be left on site as they are a
potential danger source and must be disposed of carefully.
3. Before connecting the machine to services, check that the details on the data plate
correspond to the services provided on site.
4. The installation has to be completed by qualified staff in accordance with all relevant
regulations and the manufacturers instructions.
5. This machine must only be used for the purpose designed: washing of dishes such as plates,
glasses, cups, cutlery, trays etc. Any other use such as washing of machine parts or objects
with higher dimensions than the working passage of which the machine allows is not
recommended and will cause damage to the machine and danger to the operators.
6. The machine must be used only by trained staff.
7. The staff handling the objects after the washing cycles must comply with hygiene
regulations.
8. Do not keep the machine in places with temperatures below 0°C.
9. The protection degree of the machine is IPX4 and it must therefore not be washed with
direct water jets at high pressure.
10.After isolating the electrical supply, only qualified staff are allowed access to the control
panel.
11.The machine is built according to I.E.C.-standard 89/336 relating to the elimination of
radio interferences and to the electromagnetic compatibility.
12.In conformity with I.E.C.-standard our dishwashers are manufactured according to the
standard of excellent technical level valid in Italy and abroad.
13.Noise of empty machine operation, measured at the working places (fig. 1) at 1.6 m height,
are as follows:
place 1 place 2 place 3
LeqA level equivalent to the
acoustic pressure dB(A)
The peak of the acoustic pressure level is not indicated, as far below 130dB(A):