Comcast 1310nm TX, Manual

Page: 9 / 23

1310nm TX
www.comcast-sa.com
5. External Function Description
5.1 Front Panel Description
1) Power indicator: The light is on while the switching power supply inside is
working.
2) Device running indicator: This indicator will flash after the device start
running.
3) Laser working status indicator: Red light means the laser is not working, but
the machine parameters are normal; flashing red light means the machine has
broken down, related fault reason see the alarm menu of the display menu;
green light means the laser is working normal.
4) RF status indicator: Flashing red light means the RF input signal is warned;
green light means RF input signal is normal.
5) 160×32 dot-matrix LCD screen: used to display all the parameters of the
machine.
6) Display the exit or cancel key of the setup menu.
7) Display the up or increase key of the setup menu.
8) Display the down or decrease key of the setup menu.
9) Display the enter key of the setup menu.