6 Twin Savvy E Instruction Manual
STROLLER ASSEMBLY
CombiUSA.com
ADJUSTING ThE RECLINING BACKREST
1.
To place the backrest in the upright position, press
and hold down the button on the recline mechanism
and pull the strap tight while pushing the recline
mechanism toward the seat back.
2.
To achieve a full recline, press and hold down the
button on the recline mechanism and pull downward.
Use CAUTION when reclining the backrest while baby is in the stroller
to prevent abrupt changes in seating position.
USING ThE GUARDRAIL
To remove individual sides of the
guardrail:
1.Press release button on the
underside of the center section of the
guardrail and pull out.
Note: To rotate either side of the
guardrail to permit easy access,
release center button and swing
the guardrail out.
2.
Squeeze the buttons on the
outside of the stroller and lift
up to remove one side of the
guardrail.
To remove the complete
guardrail:
1. Squeeze both buttons on the
underside of the middle section
and lift up.
2. Squeeze the buttons on the both
outside sections of the stroller and
lift up to completely remove the
guardrail.