1. Attach the Support Bar by pressing into the Seat Base until the metal pins
snap into place as shown in figure 1.
The Support Bar can only be attached one way. Notice that one side of the
Seat Base and Support Bar is notched, as shown in figure 2, and the other
side is not. Be sure you have the correct sides aligned before attempting to
attach.
- 3 -
2. Align the Support Bar with the Support Base as shown in figure 3. The
Support Bar and Support Base can only be attached one way. Notice the
metal post in the Support Bar and the middle hole in the Support Base
are slightly off center as shown in figure 4. Aligning these will ensure the
Support Bar and Support Base will be attached correctly.
3. Slide the Support Base onto the Support Bar
and press firmly until you hear them snap
together as shown in figure 5. Lift up on
the Support Base to ensure they are locked
together.
figure 1
figure 2
figure 3
figure 4
Assembling the Bouncer
figure 5
