COMBI International Corporation
•
189-199 Easy St.
•
Carol Stream, IL 60188
•
www.combi-intl.com
Customer Service 1-800-992-6624
•
10:00 a.m. - 5:00 p.m. Central Standard Time
•
Monday - Friday
- 3 -
Opening the Stroller
1.
Press the pivot
buttons in and
raise pivot
handle.
2.
Release the
manual latch
located on the
side of the
stroller.
3. Place one hand on
the handle and one
hand on the seat.
While grasping the
handle, push the
seat away from the
handle until the
stroller opens
entirely and locks
into the opened
position
4. Pull the basket frame until it clicks
and locks into place.
Note: The basket locks into a fixed
position and is not moveable.
1. Place the rear axle and
rear wheel holders in
front of you with the leg
opening facing up and
the brake levers toward
you. Slide each wheel
holder onto the axle.
2. Place each wheel on the axle with the brake projections to the inside.
3. Place a washer on the axle, on the outside of each wheel. (In some
instances, more than one washer on each side may be necessary to
take up free play. If binding is noted, remove one of the washers.)
4. Push the straight end of the pin through the hole in each end of the axle
to lock the wheels and holders in place (See
Figure A
).
5. Cover the exposed axle ends with wheel caps.
6. Lay the stroller on its front with the rear legs up. (See
Figure B
). Slip the
rear wheel holders with the brake levers facing up onto the rear legs
until they click into place.
Figure A
Pushing the pin
Figure B
Attaching the rear
wheel unit to the
main body
Attaching the Rear Wheels
